Toro Bull bar, To suit Toyota Land Cruiser 200 Series, 2015-2021

Offroad Animal Toro Bull Bar – Toyota LandCruiser 200 Series (2015–2021)

The Toro Bull Bar gives the 2015–2021 LandCruiser 200 Series a more traditional full-height bull bar setup, with upper protection around the grille and headlights while still keeping provision for a winch, lighting, recovery points and antennas.

It sits around 150–160mm forward of the grille, so you still get the coverage and mounting space of a full bull bar without pushing the front of the vehicle unnecessarily far forward.

Vehicle Fitment

Suits Toyota LandCruiser 200 Series models from 2015 to 2021, excluding GX.

• ADR compliant

• Airbag compatible

• Works with factory parking sensors

• Works with adaptive cruise radar

• Works with headlight washers

• Retains factory fog lights

• Full bumper replacement

• No cutting of the factory bumper required

Steel Construction

The Toro uses full steel construction with different material thicknesses throughout the bar:

• 2mm steel mesh panels

• 3mm steel pan and wings

• 5mm steel mounts and winch cradle

The bar uses a one-piece welded construction with welded wing supports, then receives a zinc-plated finish before matte black powder coating.

Winch Setup

The integrated winch cradle suits most low-mount winches up to 12,000lb, including the Warn Zeon.

The winch mounts feet-down and can be installed after the bull bar has already been fitted, making future winch installation or access easier.

A number plate flip is included for winch-equipped setups.

Recovery & Jacking Points

The bar mounts incorporate 20mm steel tow hooks, with each tow point rated by Offroad Animal to 4.5 tonnes.

Hi-lift jacking points are also built into the bar.

Lighting Options

The centre of the Toro can take a single-row LED light bar up to 22 inches.

In the wings, you can retain the factory fog lights or fit:

• Up to 2 cube lights per side

• Up to an 8" LED light bar per side

If you're not running a centre light bar, an optional cover plate is available for the opening.

Lighting is sold separately.

Antenna Mounts

Antenna mounts are supplied as standard and bolt to the rear of the bull bar uprights, giving you a proper mounting point for UHF or touring antennas without needing to add a separate bracket.

Key Features

• Full steel bumper replacement

• One-piece welded construction

• Welded wing supports

• Zinc plated and matte black powder coated

• Integrated winch cradle

• Suits most low-mount winches up to 12,000lb

• Winch can be fitted after the bar

• Centre position for a 22" single-row LED light bar

• Factory fog light compatible

• Antenna mounts included

• 20mm steel tow hooks

• 4.5-tonne rated tow point per side

• Hi-lift jacking points

• Number plate flip included

• Colour coding available

What's Included

• 1 x front bar weldment

• 1 x LH chassis impact bracket

• 1 x RH chassis impact bracket

• 1 x mesh fairlead mount

• 1 x LH mesh infill

• 1 x RH mesh infill

• 1 x LH light cover mesh

• 1 x RH light cover mesh

• 1 x LH fog lamp bracket

• 1 x RH fog lamp bracket

• 1 x centre bash plate

• 1 x LH under-wing panel

• 1 x RH under-wing panel

• 1 x winch control box bracket

• 1 x number plate flip

• 1 x pinch weld seal

• Fitting hardware

Fitting

The Toro is a complete bumper replacement and does not require cutting of the factory bumper.

Offroad Animal lists approximately 4 hours installation time with a 5/10 fitting difficulty.

If you're adding a winch, lighting or antennas at the same time, it makes sense to work out the complete setup before installation so everything can be positioned properly from the start.

Speak with the 4WD Obsession Noosa team if you'd like help with fitting, winch selection or lighting setup for your 200 Series.