Predator Bull bar, Isuzu MUX (facelift) 2025 on

Offroad Animal Predator Bull Bar – Isuzu MU-X Facelift (MY25–Present)

The Predator gives the facelift MU-X a more open, low-profile front bar while still giving you the winch, recovery and lighting capability needed for touring and off-road use.

It has also been designed around the technology fitted to the MY25-on MU-X, including sensors, cameras and radar systems, so you are not giving up the factory driver-assistance equipment just to fit a proper front bar.

Vehicle Fitment

Suits all Isuzu MU-X variants from MY25 to Present, including X-TERRAIN.

The Predator is:

• ADR compliant
• Airbag compatible
• Compatible with factory sensors
• Compatible with factory cameras
• Compatible with factory radar systems
• Compatible with factory fog lights

The bar replaces the factory bumper without requiring the bumper itself to be cut, although the grille does require trimming during installation.

Compact Front-End Fit

The Predator sits approximately 120mm forward of the grille, keeping the front end relatively tight for a steel replacement bar.

Its open upper design also leaves plenty of room to configure the front lighting around how the vehicle is actually being used.

Winch Setup

The integrated winch cradle is rated for winches up to 12,000lb and suits most common low-mount winches, including the Warn Zeon.

The winch mounts feet-down and can be fitted after the bull bar has already been installed, making later installation or servicing easier.

A number plate flip is included for winch-equipped vehicles.

Recovery Points

The Predator includes 20mm steel recovery points as part of the mounting system.

Each recovery point is rated to 4.5 tonnes.

Hi-lift jacking points are also incorporated into the bar.

Lighting Options

The centre of the Predator can take a single-row LED light bar up to 22 inches.

There is also room for 9" driving lights directly on the bar.

If you want more upper structure or a different lighting layout, several bolt-on hoop options are available:

• Stealth Hoop – suits a 22" single-row LED light bar
• Rally Hoop – suits Offroad Animal 7" Butt Kicker driving lights
• Rally Hoop – available for STEDI EVO 7.5" lights

Hoops and lighting are sold separately.

Construction & Finish

The Predator uses a one-piece welded steel construction with welded wing supports.

It is zinc plated before being finished in matte black powder coat, with colour coding also available.

What’s Included

• 1 x front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x LH mesh infill
• 1 x RH mesh infill
• 1 x LH light-cover mesh
• 1 x RH light-cover mesh
• 1 x LH fog-lamp bracket
• 1 x RH fog-lamp bracket
• 1 x upper grille
• 1 x centre bash plate
• 1 x lower bash plate
• 1 x LH under-wing panel
• 1 x RH under-wing panel
• 1 x LH chassis-bracket gusset
• 1 x RH chassis-bracket gusset
• 1 x number plate flip
• Fitting hardware

For a MY25-on MU-X where you want proper winch and recovery capability without the full-height Toro arrangement, the Predator keeps the front end more open while still integrating the vehicle’s factory technology and giving you plenty of flexibility for lighting.