Predator bull bar, Ram 1500 DT, 2021 to 2025 (MY24) - Non Hurricane motor

Offroad Animal Predator Bull Bar – RAM 1500 DT (2021–MY24) – Non-Hurricane

The Offroad Animal Predator replaces the factory front bumper on the RAM 1500 DT with a full steel, winch-compatible bull bar designed to provide front-end protection without pushing unnecessarily far forward.

It also provides integrated positions for recovery, auxiliary lighting, antennas and a large low-mount winch while retaining the vehicle’s parking sensors and safety technology.

Vehicle Fitment

Suits RAM 1500 DT Laramie and Limited models from 2021 through MY24.

Does not suit the facelift MY25 model fitted with the Hurricane engine.

Offroad Animal has a separate bull bar for the MY25 Hurricane-powered model.

Front Profile & Weight

The Predator adds approximately 75mm to the front of the vehicle compared with the standard bumper.

Offroad Animal lists:

• Approximately 35kg of factory components removed

• Approximately 71kg bull-bar installation weight

• Approximately 36kg net added vehicle weight

Winch Compatibility

The bar suits most low-mount winches, including:

• Warn Zeon

• Warn winches up to 16,500lb as specified by Offroad Animal

The winch mounts feet-down and can be installed after the bull bar itself has been fitted.

A number plate flip bracket is included for winch-equipped vehicles.

Recovery Points

The mounting system includes 20mm steel tow/recovery hooks as standard.

No recovery-point load rating is stated in the supplied specifications.

Lighting Options

The centre of the bar can accommodate a single-row LED light bar up to approximately 32 inches.

A cover plate is available if the centre light-bar position is not being used.

Optional upper lighting configurations include:

• Stealth Top Hoop with up to a 32" single-row LED light bar

• Quad Rally Hoop with provision for:

  • 2 x 9" Offroad Animal Ass Kicker driving lights

  • 2 x 7" Offroad Animal Butt Kicker driving lights

Offroad Animal also recommends its compatible replacement fog-light setup for the bar.

Forward Camera Note

If the vehicle is fitted with a forward-facing camera, the optional Stealth Hoop can partially obstruct its view.

A compatible camera relocation kit is available for mounting the camera to the hoop.

The Quad Rally Hoop also provides provision for relocating the forward camera.

Factory Technology

The Predator is designed to work with:

• Factory parking sensors

• Vehicle safety technology

It is also:

• ADR compliant

• Airbag compatible

The factory bumper does not require cutting for installation.

Construction & Finish

The Predator uses a welded one-piece steel bar with welded wing supports.

It is:

• Zinc plated for corrosion protection

• Powder coated matte black as standard

• Able to be colour coded to the vehicle

Integrated Hi-Lift jacking points are also built into the design.

Lower bash protection is supplied as part of the kit.

What’s Included

• 1 x front bar weldment

• 1 x LH chassis impact bracket

• 1 x RH chassis impact bracket

• 1 x mesh fairlead mount

• 1 x LH mesh infill

• 1 x RH mesh infill

• 1 x LH light-cover mesh

• 1 x RH light-cover mesh

• 1 x LH fog-lamp bracket

• 1 x RH fog-lamp bracket

• 1 x centre bash plate

• 1 x secondary bash plate

• 1 x LH under-wing panel

• 1 x RH under-wing panel

• 1 x LH chassis-bracket gusset

• 1 x RH chassis-bracket gusset

• 2 x winch-cradle supports

• 1 x centre-pan support

• 1 x number plate flip bracket

• Fitting hardware

For a pre-Hurricane RAM 1500 DT that needs proper front protection, a large low-mount winch and flexible lighting options, the Predator provides a compact steel front-end setup while retaining the vehicle’s parking sensors and safety systems.