Aluminium Front Bar with RIVAL LED Fog Lights (Set of 2) – Ford Ranger PX1/PX2/PX3 (2011-2022)& Everest (2015–2022)

Aluminium Front Bar with RIVAL LED Fog Lights – Ford Ranger PX1/PX2/PX3 (2011–2022) & Everest (2015–2022)

The Aluminium Front Bar replaces the factory front bumper on the Ford Ranger PX1, PX2, PX3 and Ford Everest, providing additional frontal protection with integrated winch mounting, recovery points and LED fog lights.

Built from 6mm aluminium alloy with a separate 5mm steel winch cradle, the bar combines front-end protection with the mounting provisions needed for off-road recovery equipment.

The design also includes an aluminium bash plate beneath the centre section, providing additional coverage around the lower front of the vehicle.

Vehicle Fitment

Designed for the following models:

• Ford Ranger PX1 (2011–2015)

• Ford Ranger PX2 (2015–2018)

• Ford Ranger PX3 (2018–2022)

• Ford Everest (2015–2022)

Listed engine applications include:

• 2.2L TDCi Turbo-Diesel

• 3.2L TDCi Turbo-Diesel

• 2.0L Bi-Turbo Diesel (selected PX3 and Everest models)

Compatible with selected XL, XLS, XLT, Wildtrak and other applicable Ranger variants, along with the Everest Ambiente, Trend and Titanium.

Confirm your vehicle's model year, engine, trim level and factory safety equipment before ordering.

Construction & Weight

The bar uses an aluminium body with a separate steel winch mounting cradle.

Construction features include:

• 6mm aluminium alloy bar construction

• 5mm steel winch mounting cradle

• Textured matte black powder-coated finish

• Integrated aluminium bash plate

• Vehicle-specific mounting arrangement

• Provision for factory parking sensors and radar equipment where applicable

The aluminium construction keeps weight lower than an equivalent steel bar body, while the steel cradle provides a dedicated mounting structure for the winch.

Listed Weight: Approximately 45kg.

Winch Compatibility

The front bar incorporates a 5mm steel winch cradle, designed to accommodate compatible low-mount winches rated up to 12,000lb.

The winch sits within the front bar assembly, keeping the recovery equipment integrated into the bumper rather than requiring a separate external mounting system.

A flip-up number plate bracket is included to provide access to the winch fairlead.

Confirm the winch's mounting dimensions and clearance requirements before installation.

Recovery Points

The bar incorporates integrated recovery points for attaching suitable recovery equipment.

The recovery points are specified with a 5,000kg Working Load Limit (WLL).

These provide designated recovery attachment locations as part of the front bar assembly, rather than relying on unsuitable bumper components.

Recovery equipment and procedures must be appropriate for the vehicle, recovery load and conditions.

Lighting

The front bar is supplied with two RIVAL LED fog lights, fitted into the outer sections of the bumper.

The recessed mounting positions keep the lights within the bar's profile while providing dedicated front fog-light locations.

Additional lighting options are available separately.

Factory Sensors & Radar

The bar is designed to accommodate factory parking sensors and radar equipment on applicable Ranger and Everest models.

This includes provision for:

• Factory front parking sensors

• Factory radar equipment where fitted

• Associated driver-assistance systems, subject to vehicle compatibility

Not every PX1, PX2, PX3 or Everest has the same factory safety equipment. Confirm the correct sensor mounting arrangement and any calibration requirements before installation.

Front-End Protection

The bar replaces the factory bumper with an aluminium assembly designed to provide additional coverage around the vehicle's front end.

The integrated aluminium bash plate extends beneath the centre section, helping protect the lower front area from rocks, debris and ground contact.

The bar also incorporates mounting positions for the winch, recovery equipment and fog lights within the assembly.

Installation

The front bar is designed as a complete replacement for the factory bumper, using a vehicle-specific mounting system.

Professional installation is recommended, particularly on vehicles fitted with parking sensors, radar equipment or additional recovery accessories.

Correct alignment, mounting and operation of factory safety equipment should be checked after fitting.

What's Included

• 1 x aluminium front bar

• 2 x RIVAL LED fog lights

• 1 x steel winch mounting cradle

• Integrated recovery points

• Flip-up number plate bracket

• Integrated aluminium bash plate

• Mounting brackets and fitting hardware

Not Included: Winch, fairlead and recovery shackles.

Product Specifications

• Brand: RIVAL 4x4

• Part Number: 2D.1808.1

• Bar Material: 6mm aluminium alloy

• Winch Cradle: 5mm steel

• Finish: Textured matte black powder coat

• Listed Weight: 45kg

• Winch Compatibility: Up to 12,000lb

• Recovery Points: 5,000kg WLL (supplier specification)

• Lighting: 2 x LED fog lights

• Application: Ford Ranger PX1/PX2/PX3 and Ford Everest (specified model years)