Predator Bull bar, To suit Toyota Fortuner N160, 2021 (MY21) to current

Offroad Animal Toro Bull Bar – Toyota Fortuner N160 (MY21–Present)

The Toro replaces the factory bumper on the MY21-on Fortuner with a full-height steel bull bar that gives you proper provision for a winch, recovery points and additional lighting while retaining compatibility with the vehicle’s factory safety systems.

It sits around 150–160mm forward of the grille, keeping the front of the Fortuner relatively compact for a full bull bar while still leaving room for the recovery and lighting setup most touring vehicles need.

Vehicle Fitment

Suits Toyota Fortuner N160 MY21 to Present.

The Toro is:

• ADR compliant
• Airbag compatible
• Compatible with Autonomous Emergency Braking (AEB)
• Full bumper replacement
• No cutting of the factory bumper required

Winch Setup

The integrated winch cradle suits most low-mount winches up to 12,000lb, including the Warn Zeon.

The winch mounts feet-down and can be installed after the bull bar has already been fitted, making future winch installation or maintenance easier.

A number plate flip is included for winch-equipped vehicles.

Lighting Options

The centre of the Toro can take a single-row LED light bar up to 22 inches.

In the wings, you can retain the factory fog lights or fit:

• 1 x cube light per side
• Up to an 8" single-row LED light bar per side

If you're not running a centre light bar, an optional cover plate is available for the opening.

Lighting is sold separately.

Recovery & Jacking Points

The bar mounts incorporate 20mm steel tow hooks.

Hi-lift jacking points are also built into the bar.

Construction & Finish

The Toro uses a one-piece welded construction with welded wing supports.

The steel is zinc plated before being finished in matte black powder coat.

Colour coding is also available.

Indicators

Two LED indicators and the required load resistors are supplied with the bar.

Crusade models fitted with sequential indicators require a different ballast resistor. Make sure the correct Fortuner trim level is selected when ordering so the correct resistor is supplied for installation.

What's Included

• 1 x front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x LH mesh infill
• 1 x RH mesh infill
• 1 x LH light-cover mesh
• 1 x RH light-cover mesh
• 1 x LH fog-lamp bracket
• 1 x RH fog-lamp bracket
• 1 x centre bash plate
• 1 x LH under-wing panel
• 1 x RH under-wing panel
• 1 x LH chassis brace
• 1 x RH chassis brace
• 1 x number plate flip
• 2 x LED indicators
• 2 x indicator load resistors
• Fitting hardware

For a Fortuner being set up with a winch, recovery gear and additional lighting, the Toro gives you a proper full-height front bar while keeping AEB compatibility and the main mounting points built into the setup.