Predator Bull bar, To suit Toyota Land Cruiser 200 Series, 2015-2021

Offroad Animal Predator Bull Bar – Toyota LandCruiser 200 Series (2015–2021)

The Predator is a full steel bumper replacement for the 2015–2021 LandCruiser 200 Series, giving you provision for a winch, additional lighting and rated recovery points while keeping the front of the vehicle relatively compact.

The bar sits around 150–160mm forward of the grille and works with the factory parking sensors, adaptive cruise radar, headlight washers and fog lights.

Vehicle Fitment

Suits Toyota LandCruiser 200 Series models from 2015 to 2021.

• ADR compliant

• Airbag compatible

• Works with factory parking sensors

• Works with adaptive cruise radar

• Works with headlight washers

• Retains factory fog lights

• Full bumper replacement

• No cutting of the factory bumper required

If you have a Sahara and want to run the optional Stealth Top Hoop, let us know when ordering. A taller hoop is required to suit the radar position in the grille.

Steel Construction

The Predator uses full steel construction with different thicknesses where they are required:

• 2mm steel mesh panels

• 3mm steel pan and wings

• 5mm steel mounts and winch cradle

The bar is zinc plated before being finished in matte black powder coat.

Weight: 52kg

Winch Setup

The integrated winch cradle suits most low-mount winches up to 12,000lb, including the Warn Zeon.

The winch mounts feet-down and can be installed after the bull bar has been fitted, making future winch installation or access easier.

A number plate flip is included for winch-equipped setups.

Recovery & Jacking Points

The bar mounts incorporate 20mm steel tow hooks, with each tow point rated by Offroad Animal to 4.5 tonnes.

Hi-lift jacking points are also built into the bar.

Lighting Options

The centre of the Predator can take a single-row LED light bar up to 22 inches.

The optional Stealth Top Hoop can also accommodate a single-row light bar up to 22 inches.

In the wings, you can retain the factory fog lights or fit:

• Up to 2 cube lights per side

• Up to an 8" LED light bar per side

If you're not running a centre light bar, a cover plate is available for the opening.

Lighting and optional hoops are sold separately.

Key Features

• One-piece welded steel bar with welded wing supports

• Zinc plated and matte black powder coated

• Integrated winch cradle for most low-mount winches up to 12,000lb

• Winch can be fitted after the bar

• Centre position for a 22" single-row LED light bar

• Factory fog light compatible

• 20mm steel tow hooks

• 4.5-tonne rated tow point per side

• Hi-lift jacking points

• Number plate flip included

• Optional Stealth or round top hoop

• Colour coding available

What's Included

• 1 x front bar weldment

• 1 x LH chassis impact bracket

• 1 x RH chassis impact bracket

• 1 x mesh fairlead mount

• 1 x LH mesh infill

• 1 x RH mesh infill

• 1 x LH light cover mesh

• 1 x RH light cover mesh

• 1 x LH fog lamp bracket

• 1 x RH fog lamp bracket

• 1 x centre bash plate

• 1 x LH under-wing panel

• 1 x RH under-wing panel

• 1 x front trim plate

• 1 x winch control box bracket

• 1 x number plate flip

• 1 x pinch weld seal

• Fitting hardware

Fitting

The Predator replaces the factory bumper without requiring the original bumper to be cut.

If you're adding a winch, lighting or a hoop, it's worth working out the complete setup before installation so the bar can be assembled around the accessories you want to run.

Speak with the 4WD Obsession Noosa team if you'd like help with fitting, winch selection or lighting setup for your 200 Series.