Toro Bull bar, Isuzu MUX (facelift) 2025 on

Offroad Animal Toro Bull Bar – Isuzu MU-X Facelift (MY25–Present)

The facelift MU-X keeps a lot of technology packed into the front end, so fitting a bull bar is about more than simply replacing the bumper.

The Offroad Animal Toro gives the MY25-on MU-X a full-height steel front bar while retaining compatibility with the vehicle’s sensors, cameras and radar systems. It also brings the winch, recovery and lighting mounts into one properly integrated front-end setup.

Vehicle Fitment

Suits all Isuzu MU-X variants from MY25 to Present, including X-TERRAIN.

The Toro is designed to work with the MU-X’s factory technology, including:

• Parking and safety sensors
• Cameras
• Radar systems

It is also:

• ADR compliant
• Airbag compatible

Front-End Fit

The Toro replaces the factory bumper and adds approximately 120mm to the front of the vehicle.

The factory bumper itself does not need to be cut, although grille trimming is required during installation.

Winch Setup

The integrated winch cradle is rated for winches up to 12,000lb and suits most common low-mount winches, including the Warn Zeon.

The winch mounts feet-down and can be fitted after the bull bar has already been installed, making later installation or servicing much easier.

A winch control-box bracket and number plate flip are supplied with the bar.

Recovery Points

The Toro includes 20mm steel recovery points as part of the mounting system.

Each recovery point is rated to 4.5 tonnes.

Hi-lift jacking points are also incorporated into the bar.

Lighting Options

The centre of the bar can take a single-row LED light bar up to 22 inches.

The factory fog lights are retained using the supplied mounting brackets.

The Toro can also accommodate larger round driving lights, including:

• Up to 9" driving lights with a slim rear housing, such as the Offroad Animal Arse Kicker
• STEDI Type-X EVO 8.5" driving lights

Lighting is sold separately.

Construction & Finish

The Toro uses a one-piece welded steel construction with welded wing supports.

It is zinc plated before being finished in matte black powder coat, with colour coding also available.

What’s Included

• 1 x front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x LH mesh infill
• 1 x RH mesh infill
• 1 x LH light-cover mesh
• 1 x RH light-cover mesh
• 1 x LH fog-lamp bracket
• 1 x RH fog-lamp bracket
• 1 x LH headlight infill
• 1 x RH headlight infill
• 1 x upper grille
• 1 x centre bash plate
• 1 x LH under-wing panel
• 1 x RH under-wing panel
• 1 x LH chassis-bracket gusset
• 1 x RH chassis-bracket gusset
• 1 x winch control-box bracket
• 1 x number plate flip
• Fitting hardware

For a MY25-on MU-X being set up for touring or off-road use, the Toro gives you proper front-end protection, rated recovery points and winch capacity while keeping the vehicle’s factory safety and driver-assistance technology integrated into the installation.