Toro Bull bar, Single Cab, Suitable for Toyota Land Cruiser 79 Series (facelift) , 2024 on

Offroad Animal Toro Bull Bar – Toyota LandCruiser 79 Series Single Cab Facelift (MY24–Present)

The Toro gives the MY24-on 79 Series Single Cab a full-height bull bar setup with provision for a winch, recovery points, lighting and antennas, while retaining compatibility with the facelift vehicle’s radar cruise and Autonomous Emergency Braking (AEB).

It sits around 150–160mm forward of the grille, keeping the bar relatively compact while still giving you the upper hoop and front-end coverage of a traditional bull bar.

Vehicle Fitment

Suits Toyota LandCruiser 79 Series Single Cab facelift models from MY24 to Present.

This bar is specifically for Single Cab vehicles and suits the widebody configuration with flares.

If you have a WorkMate without flares, flares will need to be added to suit the widebody bar correctly.

Factory Safety Systems

The Toro is:

• ADR compliant
• Airbag compatible
• Compatible with radar cruise
• Compatible with Autonomous Emergency Braking (AEB)

Bar Construction

The Toro uses a one-piece welded bar with welded wing supports and a welded upper hoop section.

It is zinc plated before being finished in matte black powder coat as standard.

Colour coding is also available.

Winch Setup

The integrated winch setup suits most low-mount winches up to 12,000lb, including the Warn Zeon.

The winch mounts feet-down and can be fitted after the bull bar has already been installed, making it easier if you decide to add a winch later or need access to it down the track.

A number plate flip is included for winch-equipped vehicles.

Lighting Options

The Toro has provision for a 30–32" single-row LED light bar beneath the upper face of the bar.

The wing sections can also be set up with:

• Factory fog lights
• Cube lights

Lighting is sold separately.

Recovery Points

Rated steel recovery points are incorporated into the mounting system as standard.

Each recovery point is rated by Offroad Animal to 4,500kg.

Antenna Mounts

Two antenna brackets are included for mounting to the top tube, giving you dedicated positions for UHF or touring antennas.

What's Included

• 1 x front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 2 x fog light mounting brackets
• 1 x centre bash plate
• 1 x pan brace
• 2 x chassis bracket gussets
• 2 x chassis recovery points
• 2 x antenna brackets
• 1 x number plate flip
• Fitting hardware

For an MY24-on 79 Series Single Cab being set up for touring or recovery work, the Toro gives you a full bull bar with the winch, lighting, antenna and recovery mounting points already built around the facelift vehicle’s factory safety systems.