Toro Bull bar, To suit Toyota Fortuner N160, 2021 (MY21) to current

Offroad Animal Toro Bull Bar – Toyota Fortuner N160 (MY21–Present)

The Toro gives the MY21-on Fortuner a full-height front bar with proper provision for a winch, recovery points and additional lighting, while still working with the vehicle’s factory safety systems.

It replaces the factory bumper without requiring it to be cut and sits around 150–160mm forward of the grille, keeping the front setup relatively compact for a full bull bar.

Vehicle Fitment

Suits Toyota Fortuner N160 MY21 to Present.

The bar is:

• ADR compliant
• Airbag compatible
• Compatible with Autonomous Emergency Braking (AEB)

Winch Setup

The integrated winch cradle suits most low-mount winches up to 12,000lb, including the Warn Zeon.

The winch mounts feet-down and can be fitted after the bull bar is already installed, which makes it easier if you're adding a winch later or need access to it for maintenance.

A number plate flip is included for winch-equipped setups.

Lighting Options

The centre of the Toro can take a single-row LED light bar up to 22 inches.

In the wings, you can retain the factory fog lights or fit:

• 1 x cube light per side
• Up to an 8" single-row LED light bar per side

An optional cover plate is available if you're not running a centre light bar.

The upper hoop can also accommodate a compatible single-row light bar up to 22 inches.

Lighting is sold separately.

Recovery & Jacking Points

The bar mounts include 20mm steel tow hooks.

Hi-lift jacking points are also built into the bar.

Construction & Finish

The Toro uses a one-piece welded bar with welded wing supports.

It is zinc plated before being finished in matte black powder coat.

Colour coding is also available.

Antenna Mounts

Two antenna mounts are supplied with the bar, giving you dedicated mounting positions for UHF or touring antennas.

What's Included

• 1 x front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x LH mesh infill
• 1 x RH mesh infill
• 1 x LH light-cover mesh
• 1 x RH light-cover mesh
• 1 x LH fog-lamp bracket
• 1 x RH fog-lamp bracket
• 1 x centre bash plate
• 1 x LH under-wing panel
• 1 x RH under-wing panel
• 1 x LH chassis brace
• 1 x RH chassis brace
• 1 x winch control box bracket
• 1 x number plate flip
• 2 x antenna mounts
• 2 x LED indicators
• 2 x indicator load resistors
• Fitting hardware

For a Fortuner being set up with a winch, driving lights and recovery gear, the Toro gives you a proper full-height front bar while keeping AEB compatibility and the main accessory mounting points built into the setup.